Battery Holder - 4xAA to Barrel Jack Connector $250 - $500  The LEDCVK-4X320 high output

  The LEDCVK-4X320 high output LED retrofit light package from Larson Electronics produces 117

000+ Hour LED Life Panel protection: Fused combiner box Lamps ETL Approved for Wet Locations System Protection: Battery over/under and ground fault IP68 Waterproof Lamps System Voltage: 24 Volts Battery Bank: 2 X 12V 200aH batteries Battery capacity: 400ah total and 200ah usable     LED Lamp Specs Lamp Type: CREE LED Total Watts: 240 (60W per lamp) Total Lumens: 21

4-BCE Y splitter blunt cut end extension cord provides a safe and effective way for operators to extend 600V and power a variety of devices for plant maintenance

' Product Overview ' Made in the USA The EPSLED-80-141-1227-16

The DB9 connector mates with our DB9 to OBD-II cable listed below

Battery Holder - 4xAA to Barrel Jack Connector $250 - $500  The LEDCVK-4X320 high outputThis is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5. 5x2. 1mm, center positive barrel jack connector. The connector mates with the barrel jack on the [Arduino](http: www. sparkfun. com commerce product_info. php? products_id=666) (among a number of other products) allowing you to easily make your project battery powered. **Note:** the average voltage regulator has about 1V of dropout (but can vary greatly). This