0.96" I2C Monocrome OLED Display FPV Foam insert to reduce pressure

Foam insert to reduce pressure pulses

The calibration proecedure takes ~15 seconds

TXT file into the root folder of microSD card

Charge Port: USB Type-C

You can use standard RC transmitter settings and the controller will calculate the PWM values for a dual motor tank like platforms

0.96" I2C Monocrome OLED Display FPV Foam insert to reduce pressureEasy to use high resolution OLED display with low power consumption. It is small, only about 1" diameter, but very readable due to the high contrast of an OLED display. The display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. The controller works with 3. 3 or 5V without needing any kind of level shifter. So, you can use it with