Tycon Passive Poe Injector 2.1mm Dc In Poe Out With Led UC501v3 with cord end terminals Weight

with cord end terminals Weight 910 g Short circuit protection Yes HIPOT (dielectric withstand test) Primary to Secondary: 1500 VAC Certification Safety: IEC62368-1 (CB Scheme)

Dry Contact Work Mode Pulse Counter

3840x2160/30Hz(HDMI1 Only)

it fits different rooms without the needofre-wiring

2 × 50 O N-Type (Center PIN: Female) for 16-channel model Channel 16 Frequency Band AU915/AS923 Sensitivity -140dBm Sensitivity @292bps Output Power 27dBm Max Protocol V1

Tycon Passive Poe Injector 2.1mm Dc In Poe Out With Led UC501v3 with cord end terminals WeightThe POE INJ LED S has 2 LED indicators. One LED indicates that DC power is being supplied to the inserter. The other LED will light up when a device is plugged in at the far end of the CAT5 cable and that device is drawing current. Operates up to 24V POE. It uses shielded connectors and cat5 cable for ultimate protection. 10 100 Ethernet Compatible. POE Injectors are used to inject DC Power to a CAT5 cable in order to power remote equipment using