Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls The ShopFloorConnect Machine Interface (SMI

The ShopFloorConnect Machine Interface (SMI 2) is the fastest way to connect virtually any machine to the ShopFloorConnect Machine Monitoring Software

This kit is for SmartPAC 2 with a date code (serial number) 1238XXXX or higher

This photosensor may also be compatible with some legacy Wintriss products

and Z directions Degree of protection IEC 60529 IP67

and provides it to ShopFloorConnect

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls The ShopFloorConnect Machine Interface (SMIWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,