1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns 162" x 2 1/2" nails

162" x 2 1/2" nails into the header and 0

The embedded anchors of the DETAL are preattached to the moisture barrier through slots that allow some adjustment during installation to avoid rebar

the Daggerz Self‑Drilling Cement Board Screw with Dagger‑Guard coating offers fast install

the GT Tie delivers both strength and symmetry

A wide array of value-engineered hole patterns are available that will accommodate different load levels while minimizing installed cost

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns 162" x 2 1/2" nailsWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".