3/4" Simpson MCR07512 Rebar Cutter Finish Nails Suited for board-to-steel applications with

Suited for board-to-steel applications with steel up to approximately 0

Drives Directly into Concrete: No expansion required

The black phosphate coating is traditional in drywall screws and is designed for use in dry interior environments only

Long Slotted Design: Allows for the most flexibility in installation and adjustment

The length of the bolt inside the anchor should not exceed 5"

3/4" Simpson MCR07512 Rebar Cutter Finish Nails Suited for board-to-steel applications withWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".