Makita Router Bit 1/4" Shaft Set A-91051 Box of 12 Metal Shear Variable speed control by dial

Variable speed control by dial and trigger switch for maximum control of sealant flow rate

REPLACEMENT TOOL: MAKITA 9237CB VARIABLE SPEED POLISHER

No load speed (rpm): 10

4 mm (1″) Bevel Angle 48° L / 48° R Miter Angle 60° L / 60° R Max Cutting Capacity (Bevel/Miter) 90°/90°: 92 x 382 mm (3-5/8″ x 15″) 90°/90°: 107 x 363 mm (4-1/4″ x 14-1/4″) 90°/90° w/ 38 mm auxiliary wood: 120 x 292 mm (4-3/4″ x 11-1/2″) 90°/90° w/ 38 mm auxiliary wood on base: 38 x 416 mm (1-1/2″ x 16-3/8″) 90°/45°LR: 92 x 268 mm (3-5/8″ x 10-1/2″) 90°/45°LR: 107 x 255 mm (4-1/4″ x 10″) 90°/45°LR w/ 25 mm auxiliary wood: 120 x 212 mm (4-3/4″ x 8-3/8″) 90°/45°LR w/ 38 mm auxiliary wood on base: 38 x 292 mm (1-1/2″ x 11-1/2″) 90°/60°LR: 92 x 185 mm (3-5/8″ x 7-1/4″) 90°/60°LR: 107 x 178 mm (4-1/4″ x 7″) 45°L/90°: 61 x 382 mm (2-3/8″ x 15″) 45°L/90°: 71 x 363 mm (2-13/16″ x 14-1/4″) 45°L/90° w/ 38 mm auxiliary wood: 80 x 292 mm (3-1/8″ x 11-1/2″) 45°L/45°LR: 61 x 268 mm (2-3/8″ x 10-1/2″) 45°L/45°LR: 71 x 255 mm (2-13/16″ x 10″) 45°R/90°: 44 x 382 mm (1-3/4″ x 15″) 45°R/90°: 54 x 363 mm (2-1/8″ x 14-1/4″) 45°R/90° w/ 20 mm auxiliary wood: 61 x 325 mm (2-3/8″ x 12-3/4″) 45°R/45°LR: 44 x 268 mm (1-3/4″ x 10-1/2″) 45°R/45°LR: 54 x 255 mm (2-1/8″ x 10″) Max Cutting Capacity Crown Molding Vertically Nested: 203 mm (8″) Crown Molding Lying Flat: 320 mm (12-5/8″) Base Board Against Fence: 171 mm (6-3/4″) Base Board Lying Flat w/ auxiliary wood on base: 416 mm (16-3/8″) No Load Speed (RPM) 3

Abrasive Belt

Makita Router Bit 1/4" Shaft Set A-91051 Box of 12 Metal Shear Variable speed control by dialHIGHLIGHTS: Round over: (Diameter: 22. 2mm, Radius: 6. 3mm) Cove: (Diameter: 22mm, Radius: 6. 3mm) Dovetail: (Diameter: 22. 7mm, Angle: 14) Chamfer: (Diameter: 32mm, Angle: 45) Rabbeting: (Diameter: 12. 7mm) Dado: (Diameter: 22. 7mm) Round nose: (Diameter: 12. 7mm, Radius: 6. 35mm) Dado: (Diameter: 15. 88mm) Dado: (Diameter: 6. 35mm) Round over: (Diameter: 28. 6mm, Radius: 9. 5mm) V groove: (Diameter: 12. 7mm, Angle: 90) Roman Ogee: (Diameter: 25mm,